SURA INTERNATIONAL's recommendations regarding premium Painter's Colors and Accessories
FAST 1010
Emulsion paint
Light odour | Very good coverage | Vapour permeable
For painting cement and cement-lime plaster, thin-layer mineral and dispersion plaster as well as substrates made of concrete, plaster and plasterboard.
Properties
FAST 1010 is an ecological paint based on polymer dispersion with mineral additives and pigments. It has very good hiding power and evens out irregularities in the substrate. The paint layer is vapour permeable and has only a slight odour. Its properties ensure a pleasant microclimate.
| Order no. | Mass | Fertility | |
| DE-1010-12 | 12.50 l | 0.12 l / m2 | Pallet: 24 pieces Yield: 0.06-0.12 l/m2 Density: 1.5 kg/dm3 Abrasion class: undercoat |
| FF412-10 | 10.00 l | 0.12 l / m2 | Pallet: 44 pieces Yield: 0.06-0.12 l/m2 Density: 1.5 kg/dm3 Abrasion class: undercoat |
| FF412-4 | 4.00 l | 0.12 l / m2 | Pallet: 80 pieces Yield: 0.06-0.12 l/m2 Density: 1.5 kg/dm3 Abrasion class: undercoat |
Technical details
Basis: aqueous dispersion based on polymer resin with mineral additives and pigments
Density: approx. approx. 1.5 kg/m3
Yield: approx. 0.06-0.12 l/m2
Drying time: at least 2 hours
Standards: Manufactured according to: EN-13300:2002
Substrate and ambient temperature: +5°C to +25°C
Storage: Store and transport the paint in tightly closed original packaging at a temperature of +5°C to +25°C. The best before date can be found on the packaging.
VOC content: less than 30 g/l
Safety advice: Avoid direct contact with eyes and skin during processing. In case of contact with eyes or skin, rinse immediately with plenty of water and contact a doctor. Keep out of reach of children.
FAST Satyna BIO
Interior latex paint
High quality latex topcoat FAST SATYNA BIO is intended for protective and decorative interior paint coats. FAST SATYNA BIO can be applied to all types of mineral substrates such as concrete, cement, cement-lime, lime and gypsum plaster, and gypsum plaster-hardboard panels, as well as surfaces coated with a polymer dispersion-based coating. Can be used for both primary and renovation painting of substrates with uniform or variable texture and colour.
Properties
FAST SATYNA BIO is a ready-to-use interior paint based on a dispersion of synthetic resin and mineral fillers with pigments, with increased resistance to microorganisms such as bacteria and fungi. It has a high resistance to mechanical damage as well as to washing and scrubbing with generally available cleaning agents, with the exception of those containing chlorine in their composition. The paint forms a coating with special aesthetic qualities characteristic of satin softness. It has limited vapour permeability. Offered in light colours from the FAST COLOR SYSTEM palette.
Packaging
bucket - 2.5 litres
bucket of 4 litres
bucket of 10 litres
Consumption
Depending on the type of substrate, the consumption of FAST SATYNA BIO ranges from 0.06 to 0.12 l / m².
Consumption refers to one coat
Technical details
Base unit: litre
Base: solvent-free dispersion of synthetic resin and mineral fillers with pigments
Density: approx. 1.4 kg/dm3
Use: after min. 24 hrs.
Temperature of the substrate and surroundings: from 5 deg C to 25 deg C
Resistance to wet scrubbing: Class 1 (EN 13300)
Drying time of first coat: Approx. 2 - 4 hrs.
Number of coats: 2
ARCHITECT WHITE
Extra white latex paint with very good coverage
Intended for painting walls and ceilings indoors. Can be used on all types of mineral surfaces such as: cement, cement-lime and gypsum plasters, gypsum plaster, gypsum plaster-hardboard panels, wallpapers, including those made of glass fibre, surfaces coated with a polymer dispersion-based coating.
Properties
ARCHITECT WHITE is an extra white latex paint with very good covering power and good resistance to washing and scrubbing. The innovative formula creates a durable coating with a matt finish that diffuses light rays, giving the wall a perfect appearance. The product is developed on the basis of the highest quality raw materials, so that the perfectly white colour will remain unchanged for years.
Packaging
bucket - 10 litres
bucket - 5 litres
Consumption
Depending on the type of substrate, the consumption of ARCHITECT WHITE is between 0.07 and 0.12 l / m².
Technical details
Base unit: litre
Base: polymer dispersion with mineral fillers and pigments
Density approx.: 1.4 kg/dm3
Wet scrub resistance: Class 2
First coat drying time: approx. 2 hrs.
Number of coats: 2
Substrate and ambient temperature: +10 deg C to +25 deg C
FAST Normal
Adhesive mortar for ceramic tiles and terracotta (interior/exterior) - type C1
FAST NORMAL is used for bonding ceramic and terracotta tiles with high absorption on non-deformable substrates such as concrete, cement and cement-lime plaster. It can be used in residential construction indoors on horizontal and vertical surfaces and outdoors on vertical surfaces - in areas not exposed to moisture and high deformation of the floor covering due to temperature changes. For deformable substrates, higher loads or tiles with lower absorption we recommend using FAST NORMAL+, FAST EXTRA or FAST EXTRA+.
Properties
FAST NORMAL adhesive mortar is a dry mineral mixture, modified with synthetic polymers, with high adhesion. Thanks to its properties, it is efficient and easy to use.
Packaging
bag - 25 kg
Consumption
Depending on the type of substrate, the consumption of FAST Normal is between 2 and 4 kg / m².
The consumption depends on the size of the comb teeth and is as follows: comb from 4-6mm approximately 2.1kg/m2 comb from 6-8mm approximately 3.2kg/m2 comb from 8-10mm approximately 4.2kg/m2
Technical details
Base unit: kg
Base: dry cementitious mixture with mineral fillers, modified with synthetic polymers
Mixing ratio: approx. 6 l of water per 25 kg of dry mix
Mortar density after mixing with water: approx. 1.7 kg/dm3
Open time: approx. 20 min.
Workability time: from 2.5 hours to 3 hours
Tensile adhesion: min. 0.5 N/mm2
Grouting: after min. 48 hrs.
FAST Normal Plus
Adhesive mortar for ceramic tiles and terracotta (interior/exterior) - type C1
FAST NORMAL PLUS is designed for bonding ceramic and terracotta tiles to non-deformable substrates such as, concrete, cement and anhydrite screed, cement and cement-lime plaster, gypsum plaster, and rigidly bonded gypsum-cardboard and gypsum-fibre boards. It can be used in construction inside and outside on vertical and horizontal surfaces, in areas not exposed to high deformation of the lining due to temperature changes. It is possible to bond tiles from above. Due to its increased parameters, it is also suitable for bonding porcelain stoneware tiles indoors. For deformable substrates or heavier loads, we recommend using FAST EXTRA or FAST EXTRA+.
Properties
FAST NORMAL + frost and waterproof adhesive mortar is a dry mineral mixture, modified with synthetic polymers, with high adhesion. Its properties make it economical and easy to use. It is characterised by a very low flow rate, which enables tiles to be glued from above.
Packaging
bag - 25 kg
Consumption
Depending on the type of substrate, the consumption of FAST Normal + is between 2 and 4 kg / m².
The consumption depends on the size of the comb teeth and is as follows: comb from 4-6mm about 2.1kg/m2 comb from 6-8mm about 3.2kg/m2 comb from 8-10mm about 4.2kg/m2
Technical details
Base unit: kg
Base: dry cementitious mixture with mineral fillers, modified with synthetic polymers
Mixing ratio: approx. 6 l of water per 25 kg of dry mix
Mortar density after mixing with water: approx. 1.7 kg/dm3
Open time: approx. 20 min.
Workability time: from 2.5 hours to 3 hours
Tensile adhesion: min. 0.5 N/mm2
Grouting: after min. 48 hrs.
FAST Grunt G
Deep-penetrating and reinforcing preparation on the basis of fine acrylic dispersion
FAST GRUNT G is a ready-to-use deep priming emulsion for use on all absorbent and porous surfaces such as: gypsum boards, gypsum cardboard, gypsum plaster, cement and cement-lime plaster, concrete substrates, aerated concrete, ceramics, etc. FAST GRUNT G, thanks to its extraordinary ability to penetrate very deeply, is particularly recommended for all old and sagging substrates.
Properties
FAST GRUNT G is non-flammable, water-based, non-sudsing, odourless, ecological, and can be used both indoors and outdoors. It strengthens the substrate, regulates the absorption process of the substrate due to its high vapour permeability, reduces paint consumption, "dries" damp walls and significantly improves the adhesion of tile adhesives. When dry, it is completely transparent. Resistant to high alkalinity of the substrate, it contains no toxic substances. Can be used ready-mixed or diluted with water in a 1:1 ratio.
Packaging
Container - 1 litre
Container - 5 litre
Container - 10 litre
Consumption
Depending on the type of substrate, the consumption of FAST Primer G ranges from 0.05 to 0.25 l / m².
Technical details
Base unit: litre
Base: fine acrylic resin dispersion
Density: approx. 1.0 kg/dm3
Drying time: one to two hours
Substrate and ambient temperature: from 5 deg C to 25 deg C
Temperature resistance: from -20 deg C to 70 deg C
Tiling: possible after approx. 2 h
Use: after min. 2 hrs.
FAST Grunt K
Bonding primer for difficult substrates
FAST GRUNT K is a ready-to-use preparation based on polymer dispersions and quartz fillers designed for priming building substrates to strengthen them and increase adhesion. It is recommended for difficult and smooth substrates, such as smoothly troweled concrete, OSB boards, old glazed tiles, terrazzo and lamellas requiring the formation of a rough grafting layer on their surface to improve adhesion to newly applied layers. Can be used indoors and outdoors at temperatures between +5°C and +25°C.
Properties
The FAST GRUNT K is a preparation of a strain, which allows for the effective application of the material to be isolated and other material to be difficult to substrate. The content of quartz fillers and appropriately matched surface, which is a corrective overlap. It is fast drying and efficient. It can be used on both horizontal and vertical surfaces.
Packaging
bucket - 1.4 kg
bucket - 6 kg
Consumption
Depending on the type of substrate, the consumption of FAST Primer K is approximately 0.3 kg / m².
Technical details
Base unit: kg
Base: aqueous polymer dispersion with added quartz flour
Density: approx. 1.4 kg/dm3
Tiling: possible after approx. 24 h
Use: after min. 24 hrs.
Adhesion to substrate: min. 1.0 MPa
Temperature of the substrate and surroundings: from +5 deg C to +25 deg C
FAST Grunt U
Universal primer for walls and floors
FAST GRUNT U is a ready-to-use preparation for priming and levelling absorption on various surfaces. It is ideal for use on concrete and aerated concrete substrates, cement and cement-lime plaster, gypsum plaster and plasterboard. It can be used both indoors and outdoors. It is an excellent base for substrates for paints, wallpapers, putties, adhesive and levelling mortars and cement floors. It increases the adhesion of finishing materials to the substrate and reduces dustiness.
Properties
FAST GRUNT U is non-flammable, water-dilutable, solvent-free, odourless, ecological, can be used both indoors and outdoors, strengthens the substrate, reduces absorption and paint consumption. When dry, it is completely transparent and vapour-permeable.
Packaging
container - 5 litres
Consumption
Depending on the type of substrate, consumption of FAST Grunt U ranges from 0.05 to 0.25 l / m².
Technical details
Base unit: litre
Base: fine acrylic resin dispersion
Density: approx. 1.0 kg/dm3
Drying time: one to two hours
Substrate and ambient temperature: from 5 deg C to 25 deg C
Temperature resistance: from -20 deg C to 70 deg C
Tiling: possible after approx. 2 h
Use: after min. 2 hrs.
FAST NORMAL SPEED
Fast-setting tile adhesive type C1FT for ceramic tiles, terracotta and porcelain stoneware
Properties
The frost and water resistant adhesive mortar FAST NORMAL SPEED is a dry mineral mixture with high adhesion and modified with synthetic polymers. Thanks to its excellent parameters, FAST NORMAL SPEED is particularly economical and easy to use. The product is characterised by very low run-off, which allows the tiles to be glued from above. Due to its rapid hardening, tiles can be grouted after just 6 hours.
| Order no. | Mass | Fertility | ||
| FK012 | 25.00 kg | 4.00 kg / m2 | Colour: Grey | Pallet: 42 pieces Adhesion values : C1 FT |
Technical details
Base: dry cement mixture with minerals, modified with synthetic polymers
Mixing ratio: approx. 7.5 litres of water per 25 kg of dry mass
Density: approx. 1.70 kg/dm3
Processing time: within 30 minutes
Open time: approx. 10 minutes
Adhesion: at least 0.5 N/mm after 6 hours
Chromium: below 0.0002%
Joints: after 6 hours at the earliest
Thickness layer: 2 to 10 mm
Temperature class: +5°C to +25°C
Fire class: Class A1/A1fl
Foot seams: after 4 hours at the earliest
Substrate ambient temperature: below 0.5 mm
Drainage: below 0.5 mm
FAST Grunt U
Snow-white levelling compound -Type 2A
FAST A1 is a ready-mix acrylic putty intended for finishing and decorative works in construction. Thanks to its properties, it is ideal for final filling on seasoned cement-lime, lime or gypsum plaster, plasterboard, concrete surfaces under any type of paint coatings. It can also be used for replenishing defects on wall and ceiling surfaces indoors.
Properties
FAST A1 is a ready-mix putty based on acrylic dispersion with fillers and modifiers added to improve plasticity and ease of application. It is not subject to shrinkage while setting and is easily workable after drying. It is characterised by an extended processing time and a snowy white colour, which significantly reduces paint consumption during painting. Can be applied by hand or mechanically.
Packaging
FAST A1 - 5 kg
FAST A1 - 9 kg
FAST A1 - 19 kg
Consumption
Depending on the type of substrate, the consumption of FAST A1 is approximately 1.5 kg / m².
Average consumption for one layer of 1.0 mm thickness
Technical details
Base unit: kg
Polymer dispersion base with the addition of mineral fillers and modifiers.
Density: approx. 1.8 kg/dm3
Drying time: between 8 h and 12 h.
Substrate and ambient temperature: from +5 deg C to +25 deg C
Max. thickness of one coat: up to 1 mm
FAST A2
Two-purpose joint compound - Type 3A For jointing plasterboards with the use of a reinforcement tape
FAST A2 is an acrylic joint compound designed for joint filling of plasterboard joints with the application of reinforcement tape. In addition, thanks to its properties, it can also be used for smoothing cement-lime plaster or gypsum plaster, plasterboard, concrete surfaces for all types of paint coatings. FAST A2 is intended for manual application, indoors only.
Properties
FAST A2 is an extra white putty based on acrylic dispersion with the addition of carbonate fillers and modifiers to improve plasticity. The specially selected composition of raw materials makes it very easy and quick to apply and the surface obtained is of the highest quality. Bending strength of over 350N.
Packaging
bucket of 5 kg
bucket of 9 kg
bucket of 19 kg
Consumption
Depending on the type of substrate, the consumption of FAST A2 is between 0.8 and 1.2 kg / m².
Joint filling - 3 coats - approx. 0.40 kg/m2 Smoothing - approx. 1.2 kg/m2/1 mm
Technical details
Base unit: kg
Base polymer dispersion with mineral fillers and modifiers
Density: approx. 1.8 kg/dm3
Drying time: 8 to 12 hrs.
Number of coats: 2-3
Substrate and ambient temperature: from +5 deg C to +25 deg C
Reaction to fire class: E
FAST G1
Extra white, flexible smoothing compound
FAST G1 is an excellent smoothing compound for finishing and decorative works in construction. Thanks to its properties, it is ideal as a levelling layer under all types of paint coatings. It can be used for replenishing defects on the surface of walls and ceilings indoors.
Properties
FAST G1 smoothing compound is a ready dry mixture produced on the basis of anhydrite meal with the addition of fillers and modifiers improving plasticity and ease of application. It is not subject to shrinkage during setting and is easily workable once dry. A major advantage is the extended product readiness time and the snowy white colour, which reduces paint consumption during painting. Can be applied by hand or by machine.
Packaging
FAST G1 - 20 kg
Consumption
Depending on the type of substrate, the consumption of FAST G1 is approximately 1 kg / m².
Average consumption given for a single coat of 1 mm thickness
Technical details
Base unit: kg
Base: mix manufactured on the basis of anhydrite meal with the addition of fillers and modifiers
Mixing ratio: 5.5 to 7 litres per 20 kg of dry mix
Mortar density after mixing with water: approximately 1.7 kg/dm3
Open time: approx. 20 min.
Workability time: 12 to 24 hrs.
Number of coats: 2
Adhesion to substrate: min. 0.5 MPa
Substrate and ambient temperature: from +5 deg C to +25 deg C
Coat thickness: 1 mm to 2 mm
Max. thickness of one layer: up to 2 mm
Reaction to fire class: A1
Compressive strength after 28 days: ≥ 2,0 MPa
Bending strength after 28 days: ≥ 1,0 MPa
ARCHITECT 300
Ceramic latex paint, stain-resistant, with superior resistance to scrubbing
Intended for painting walls and ceilings indoors. The paint can be used on all types of mineral surfaces such as cement and lime plasters, gypsum plaster, gypsum plaster-hardboard panels, wallpapers, including glass fibre wallpapers, and surfaces coated with a polymer dispersion-based coating. Due to its exceptional properties, it is suitable for painting heavily used surfaces that require frequent cleaning. Ideal for public areas, healthcare facilities, nurseries, crèches, food processing plants and private dwellings, including children's rooms, living rooms and dining areas.
Properties
ARCHITECT 300 is a ceramic, stain-resistant latex paint with superior resistance to scrubbing and washability and excellent adhesion to mineral substrates. The innovative formula using ceramic fillers creates a highly durable coating with a matt or semi-matt finish. The product is formulated with the highest quality raw materials, so your colour will remain unchanged for years. The product does not splash during painting. Paint available in a wide range of colours according to FAST COLOR SYSTEM.
Packaging
bucket - 2.7 litres
bucket of 4.5 litres
bucket of 10 litres
Consumption
Depending on the type of substrate, the consumption of ARCHITECT 300 is between 0.07 and 0.12 l / m² per coat.
Technical details
Base unit: liter
Base: polymer dispersion with mineral fillers and pigments
Density: approx. 1.4 kg/dm3
Drying time of first coat: approx. 2 hrs.
Number of coats: 2
Substrate and ambient temperature: from +10 deg C to +25 deg C
Resistance to wet scrubbing: Class 1
Full catalog
